Does ND mean zero THC?
No. ND usually means not detected under the laboratory’s stated reporting convention. It does not establish that the sample contains absolutely no THC. LOD describes detection capability; LOQ describes the level at which a method can quantify a substance with specified accuracy and precision. Start with the report’s own legend before comparing these terms.
A cannabis certificate of analysis, or COA, describes the sample and tests reported. Check the named compound: a delta-9 THC result is not automatically a result for THCA or every other cannabinoid. This guide explains how to read analytical results, not how to predict a drug-test outcome or determine a product’s legality.
ND, LOD, LOQ, and reporting limits compared
A result label, a method limit, and a regulatory threshold are different kinds of information. Read across the same analyte row, keeping the units and report footnotes together. An analyte is simply the substance being tested.
| Term | What it describes | What it does not establish |
|---|---|---|
| ND: not detected | A reported result interpreted using the lab’s definition and stated limit. | Absolute absence of the substance. |
| LOD: limit of detection | The method’s ability to distinguish a substance from background or a blank. | A reliably quantified concentration. |
| LOQ: limit of quantitation | A level at which the method meets its criteria for quantitative measurement. | An exact value without measurement uncertainty. |
| RL or MRL: reporting limit | The threshold used for reporting under the stated method or program. | A universal synonym for LOD. |
| Action or acceptable limit | A criterion against which a result is assessed under a specified program. | The sensitivity of the analytical method. |
An illustrated COA example: follow the units and legend
The illustration above is an original teaching example, not a genuine certificate, product result, or regulatory limit. Its imaginary sample is EXAMPLE-01. The delta-9 THC row reads ND, with an LOD of 0.01 mg/g and an LOQ of 0.03 mg/g. Its legend explicitly defines ND as not detected at or above the LOD.
Read the three numbered annotations together. First, mg/g is the concentration unit: it cannot be compared directly with a percentage without conversion. Second, the two limits refer to this analyte and example method. Third, the legend tells you how the lab uses ND. Without that legend, the letters alone are incomplete information.
In this example, ND supports only a non-detection under the stated conditions. It does not supply a measured concentration of 0.00 mg/g. The report also says contaminant panels were not tested, so this cannabinoid row cannot stand in for pesticide, metal, or microbial results.
Three hypothetical results from the same method
Keep the example limits fixed: LOD 0.01 mg/g and LOQ 0.03 mg/g. These invented concentrations illustrate reporting categories; they are not suggested amounts or compliance thresholds.
Example A: a sample containing 0.005 mg/g is below this method’s stated LOD. Under the example convention it may be reported ND. That is why non-detection does not establish zero. In real testing, detection near a limit is probabilistic rather than a perfect on/off switch.
Example B: a signal corresponding to approximately 0.02 mg/g is above the LOD but below the LOQ. Under a convention that distinguishes this category, the lab may report detected, below LOQ. The approximate concentration used in this teaching example should not be mistaken for a validated, unqualified quantitative result.
Example C: a valid result of 0.08 mg/g is above the LOQ. If the method’s other quality checks pass and the result lies within its validated range, the lab can report a numerical concentration. That still carries measurement uncertainty. Being quantifiable does not by itself establish whether the result passes an applicable limit.
Does less than LOQ always mean detected?
Do not assume that from the symbol alone. Trichome Analytical explicitly uses <LOQ for results above its LOD but below its LOQ, and ND for results below its LOD. That tells you how to interpret its stated convention. Another report may use a broader below-reporting-limit category or provide a separate detection qualifier.
The useful question for an unfamiliar report is: does this entry confirm detection, or only say that no quantified result is being reported above the stated limit? Ask the issuing laboratory when the legend does not resolve it. An estimated numerical result may also carry a qualifier; it should not be treated as an ordinary unqualified measurement.
Why two labs can report the same concentration differently
Consider a second hypothetical lab with an LOD of 0.04 mg/g and LOQ of 0.10 mg/g. A sample around 0.02 mg/g lies between the first lab’s limits but below the second lab’s detection limit. Under the conventions described here, one could report detected below LOQ while the other reports ND. Those labels need not contradict each other.
This is a simplified explanation, not proof that two actual samples or results agree. Before comparing real reports, check batch and sample identity, the analyte, units, method, sample preparation, and reporting definitions. Sampling differences and measurement uncertainty can also affect comparisons.
There is no universal conversion that lets a reader calculate every LOQ from an LOD. Use the validated limits on the report. New York’s February 2026 standard, for example, requires method-specific LOQ verification and links its MRL definition to LOQ; that is a named program’s terminology, not a rule for every country.
ND, PASS, blank, and not tested are not interchangeable
ND describes a result relative to a reporting convention. PASS describes an assessment against a criterion. A detected contaminant can be below an applicable action limit, so passing need not mean non-detection. Conversely, a report’s non-detection is difficult to assess against a stricter threshold if the method is not sensitive enough to resolve that threshold.
A blank field is unresolved information. Not tested means the report provides no result for that test. Neither should be silently converted into ND or PASS. Illinois’s consumer guidance explicitly cautions that a COA is not a universal safety guarantee and that unperformed testing cannot be inferred.
An action limit is a decision criterion under a particular program, not a sharp boundary between harm and harmlessness for every person. Check the jurisdiction, product category, and current applicable requirements before drawing a compliance conclusion. This guide deliberately supplies no universal cannabis pass/fail numbers.
A short checklist for an unclear report
Match the product, batch or lot, and sample details first. Then identify the exact compound, unit, result, detection or quantification limits, and any qualifiers. Read the footnotes rather than relying on an isolated screenshot of one row.
If the meaning remains unclear, ask the laboratory which limit governs ND, whether <LOQ confirms detection, and whether any required panel is missing or reported separately. Ask what method and reporting convention apply to that particular sample.
The defensible conclusion is limited to what the report actually supports. An ND result cannot establish absolute zero, guarantee a negative drug test, or answer every question about a product. A more informative report makes its scope, limits, and remaining uncertainty visible.



